Concrete Sealer for External surfaces (solvent based)

Sealer for concrete drives, industrial floors and paths

Our sealer for external concrete is designed to protect concrete from all forms of deterioration. Smartseal concrete sealer should only be applied to concrete slabs that have been laid at least 7 days. A durable hard wearing sealer for driveways & other areas of hardstanding concrete. Also used as a garage floor sealer and concrete dustproofer.

Concrete Sealer Benefits

• Provides Excellent protection and durability
• Application by solvent resistant sprayer, roller or brush
• Stain resistant
• Manufactured to BS5750/ISO9000 standard
• Reduces efflorescence
• Does not peel or blister, hardens and seals all forms of concrete
• Leaves 'damp' colour enhancing sheen on surface

Approximate Coverage
3 to 5m2 per litre per coat dependent on nature of concrete and method of application. For best results, apply 2 coats, if being used solely as a dustproofer, 1 coat is normally adequate. Clean tools with Smartseal Cleaning Fluid.

ENSURE SUITABLE SAFETY WEAR, MASK, GLOVES and GOGGLES are worn at all times during use of product.

Application

Only apply to clean surfaces that are totally dry. Apply with a solvent resistant sprayer unit, paint brush or roller, Avoid over application and pooling. Two coats of concrete sealer are recommended, leave at least 2 hours between coats, can be re-applied at anytime.

Do not use deicing salts on areas concrete sealer has been applied. Salt chemically damages the surface, will reduce lifespan and damage the sealer allowing water ingress. Subsequent freezing may result in the concrete ‘seal’ being broken by the expansion of water as it freezes and white ‘pitted’ areas may become visible.

Technical & Test Data

Smartseal Concrete Sealer has been independently tested by the TRL (Transport Research Laboratory) It is certified that it reaches the standard of SRV (Skid Resistance Value) for concrete paved surfaces used by local authority for pedestrian and vehicular use. Copies available on request.

Health & Safety

Recommended for external use only, contains flammable liquid. Do not smoke. Ensure application is well ventilated. Wear respirator , gloves and goggles when applying.  Must be stored in dry,  cool place. Flash point 42°C (Abel-Closed Cup).  For further information, see Health & Safety Data Sheet.

QUICK AND RELIABLE DELIVERY THROUGHOUT IRELAND

We offer a delivery service across Ireland for all of our products. 

We provide a comprehensive guarantee of quality and ensuring a reliable nationwide delivery service to all our customers is very important. It does not matter if you live in Dublin, Cork, Sligo or Limerick, our service is as consistent and reliable as can be. This is a testament to the many satisfied customers that have commented on our delivery service over the years. 

We can deliver to another address if you are not going to be in to receive the products. If you notify us with clear delivery instructions, we can also leave with a neighbour or somewhere at your property without a signature.

It is also our aim to monitor our stock levels closely to ensure we can always fulfill demand and make sure products are sent out as soon as possible.

Please read the section relating to deliveries under our Terms and Conditions.