Delivery
From €4.05*
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

'BLOCK MAGIC' Sealer GREY - Re-colour Old Block Paving - ALWAYS Clean 1st with Xtreme Cleaner & Apply 2nd coat of Sealer

Re-colours, seals and protects older block paving; finish with a coat of our clear Block Paving Sealer (either Matt or Silk)

62.95
In Stock
Please select a size
Paypal
Visa
Visa Electron
MasterCard
Maestro
Product Description

Add colour to your block paving to make it look like new

Smartseal 'Block Magic' is a blend of liquid pigments and acrylic resins that soak deeply into the paving totally transforming and protecting block paving driveways and patios. If you would like to restore the original colour of your cobblelock driveway, 'Block Magic' is the answer. Restoring colour to brick paving is now easy and can save you a considerable sum of money. 'Block Magic' replaces colour that sun, rain ,vehicles and pressure washing has taken away. 

Apply one coat of 'Block Magic' by brush or roller, leave to dry, resand the joints and apply 2nd coat of clear sealer.

***Always apply to test area first***

  • Transforms Old Block Paving
  • Recolours and Protects
  • UV Stable
  • Colour Fast
  • Stain Resistant
  • Hardwearing
  • Also available in Black

See Technical section below for more information.

Technical

Liquid UV stable pigments blended with acrylic resins and solvents create "block magic". Developed by Smartseal with older block paving in mind, it will not only recolour block paving but protect the paving from future colour loss, weeds algae and staining.

'Block Magic' Coloured Paving Sealer is applied by roller, at a rate of approx 3.0m2 per litre. Make sure the colour has dried evenly across the block paving before appying a clear second coat of sealer.Prior to applying sealer, sweep kiln dried sand into the joints and ideally compact with 'wacker plate'.The sealer will be tack free within 2 hours at 20°C and foot traffic may be permitted after 4 hours. Vehicles should be kept off the sealed area for a minimum of 24 hours at 20°C. These times may be increased or reduced depending on the ambient temperature.
Ensure no rain is forecast for at least 6 hours after application. Do not apply when the ground temperature is above 30°C or below 10°C.
All equipment should be cleaned with Smartseal cleaning fluid after use.

Deicing salts should not be applied directly on sealed block paving or concrete sealers.
Salt chemically reduces the temperature at which water freezes and will result in water ingress into the pavers.
Subsequent freezing may result in the paving 'sealer' being broken by the expansion of water as it freezes and white 'pitted' areas may become visible.

*****NOT TO BE USED ON CLAY PAVERS

Preparation
 
Existing paving should be pressure washed to remove all surface debris and muck from the joints.
If the area is contaminated with weeds & moss then it should be treated with Smartseal moss clear or weed killer.
Oil and other stains should be removed using Smartseal Driveway Cleaner or Oil Remover.
The treated area should then be left to dry and the joints re-sanded & compacted to the lower edge of the paver chamfers with clean kiln-dried sand.
Moisture in the paver & sand will inhibit penetration of the sealer and produce whiteness.

Technical & Test Data
Smartseal Block Paving sealer has been tested by the TRL (Transport Research Laboratory) and certified that it meets the SRV (Skid Resistance Value) for all categories of paving for local authority pedestrian areas and when heavily trafficked is suitable for special applications where risks of skidding are high as laid down in the UK Highway Authorities Tender Specification. Copies available on request.

Specification Clause
"Newly laid block paving shall be treated with Smartseal block paving sealer to protect and stabilise jointing sand and enhance surface colour and increase abrasion resistance.
 All materials should comply with ISO9002 for Quality Assurance.

All work should be carried out in conjunction with the manufacturer's current technical data sheet and instructions for use".

Health & Safety
Flammable liquid. Do not smoke. Keep application area well ventilated.

Wear respirator, gtloves and goggles when applying. Store in a cool place. Flash point 40°C (Abel-Closed Cup). Refer to the Health & Safety Data Sheet for further information.

Product FAQs
Ask Us A Question
Send us a question
Delivery

QUICK AND RELIABLE DELIVERY THROUGHOUT IRELAND

We offer a delivery service across Ireland for all of our products. 

We provide a comprehensive guarantee of quality and ensuring a reliable nationwide delivery service to all our customers is very important. It does not matter if you live in Dublin, Cork, Sligo or Limerick, our service is as consistent and reliable as can be. This is a testament to the many satisfied customers that have commented on our delivery service over the years. 

We can deliver to another address if you are not going to be in to receive the products. If you notify us with clear delivery instructions, we can also leave with a neighbour or somewhere at your property without a signature.

It is also our aim to monitor our stock levels closely to ensure we can always fulfill demand and make sure products are sent out as soon as possible.

Please read the section relating to deliveries under our Terms and Conditions.

Share this product
 
COMPARISON BASKET COMPARE