s Block Paving Sealer in Matt Finish
Cobblelock Driveway Sealer for Brick Paved Driveways
Smartseal Block Paving Sealer MATT finish has been specially formulated to help prevent weeds growing on block paved surfaces. It also provides greater levels of stain resistance from oil, dirt and grease. The cobblelock driveway sealer MATT hardens sand in the joints and helps prevent weed growth. The brick paving sealer MATT can be applied easily by sprayer or roller.
It will seal block paving and make it non-porous, this will make the block paved driveway or patio easier to clean and maintain.The sealed surface of the block paving will help to prevent the erosion of the jointing sand and help to provide a barrier to any surface contaminants facilitating easier ongoing maintenance.
***DO NOT USE ON CLAY PAVERS
- Enhances colouring of older block paving
- Simply application by sprayer or roller
- Protects the colouring from fading
- Filters out damaging UV light
- Oil and stain resistant
- Inhibits weeds
- Manufactured to BS5750/ISO9000 standards
- For best results apply two coats
Recommended coverage rates for application
First coat: 2.0sq metres per litre
Second coat: 3.5sq metres per litre
Application
Smartseal Block Paving sealer can be applied using a sprayer unit or roller, at a rate of 2.5m2 per litre (pavers) 1st coat & 3.5 m2 per litre 2nd coat. A two-coat spray application is required to fully cover the jointing sand. The sealer will be tack free within 2 hours at 20°C and foot traffic may be permitted after 4 hours. Vehicles should be kept off the sealed area for a minimum of 24 hours at 20°C. These times may be increased or reduced depending on the ambient temperature. During the curing cycle, protect from rain. Do not apply when the ground temperature is above 30°C or below 5°C. All equipment should be cleaned with Smartseal tool cleaner after use.
Deicing salts should not be applied directly on Smartseal block paving or concrete sealers. Salt chemically reduces the temperature at which water freezes and will result in water ingress into the concrete. Subsequent freezing may result in the concrete ‘seal’ being broken by the expansion of water as it freezes and white ‘pitted’ areas may become visible.
NOT TO BE USED ON CLAY PAVERS
Preparation
New block paving or cobble stone paving should be swept clean, ensuring there is sufficient well-compacted sand in the joints. Existing paving should be pressure washed to remove all surface debris. If the area is contaminated with weeds & moss then it should be treated with Smartseal Fungicidal Wash. Oil and other stains should be removed using Smartseal Cleaner / Oil Remover. The treated area should then be left to dry and the joints re-sanded & compacted to the lower edge of the paver chamfers with clean kiln-dried sand. Moisture in the paver & sand will inhibit penetration of the sealer and produce whiteness.
Technical & Test Data
Smartseal Block Paving sealer has been tested by the TRL (Transport Research Laboratory) and certified that it meets the SRV (Skid Resistance Value) for all categories of paving for local authority pedestrian areas and when heavily trafficked is suitable for special applications where risks of skidding are high as laid down in the UK Highway Authorities Tender Specification. Copies are available on request.
Specification Clause
“Newly laid block or flagstone paving shall be treated with Smartseal block paving sealer to protect and stabilise jointing sand and enhance surface colour and increase abrasion resistance. All materials should comply with ISO9002 for Quality Assurance. All work should be carried out in conjunction with the manufacturer’s current technical data sheet and instructions for use”.
Health & Safety
Flammable liquid. Do not smoke. Keep application area well ventilated. Wear respirator when applying. Store in a cool place. Flash point 40°C (Abel-Closed Cup). Refer to the Health & Safety Data Sheet for further information.
QUICK AND RELIABLE DELIVERY THROUGHOUT IRELAND
We offer a delivery service across Ireland for all of our products.
We provide a comprehensive guarantee of quality and ensuring a reliable nationwide delivery service to all our customers is very important. It does not matter if you live in Dublin, Cork, Sligo or Limerick, our service is as consistent and reliable as can be. This is a testament to the many satisfied customers that have commented on our delivery service over the years.
We can deliver to another address if you are not going to be in to receive the products. If you notify us with clear delivery instructions, we can also leave with a neighbour or somewhere at your property without a signature.
It is also our aim to monitor our stock levels closely to ensure we can always fulfill demand and make sure products are sent out as soon as possible.
Please read the section relating to deliveries under our Terms and Conditions.
Excellent product and service
Had to clear a lot of weeds and resand cobblelock. The sand is now sealed as hard as concrete, very happy with this product.
Like most people I wasn't sure which would be the best sealer. I have just finished cleaning / resanding a driveway and used smartseal matt finish, exactly as instructed. It rained a few hours later but I could see the joints were completely water resistant. Delighted with this product, and now two neighbors have asked if I can resand and seal their driveways. I highly recommend this product, but you must follow the instructions.