Polyurethane Block Paving Sealer for Commercial use

An oil resistant and durable urethane block paving sealer.

Smartseal urethane block paving sealer is a low viscosity prepolymer solvent based sealer primarily formulated for commercial sealing applications of block paving. The urethane sealer will solidify the jointing sand and create a very long lasting, and oil resisant seal on the surface of concrete block paving. The urethane cobblelock sealer is very durable and is oil resistant.

A urethane brick paving sealer that really works and can keep cobblelock surfaces weed free.

**DO NOT USE ON CLAY PAVERS

See Case Studies of commercial sealing projects where our polyurethane sealer has been succesfully used.

• UK Manufactured to BS5750 standards
• Acts as a colour enhancer on block paving
• Very Stain Resistant
• Oil Resistant
• Hardens Jointing Sand
• UV Filters help to prevent colour loss
• Does not peel or flake
• Can be pressure washed
• Does not mark with car tyres
• Inhibits weed, moss and algae growth
• Prevents ant infestations on block paving
• Easy to apply by roller or squeegee

Always apply two coat of sealer for best results - Apply at a ratio of approx 2sq metres per litre on the 1st coat and 3.5sq metres per litre on the 2nd coat. Ensure the second coat is applied within 4 hours to ensure the 2 coats of sealer 'key' together.

Our Polyurethane block paving sealer is an oil resisant and very durable sealer for use on larger areas of block paving, normally on commercial properties. It can only be used on precast concrete block pavers. The urethane cobblelock sealer will help to keep brick paving free from weeds.

Urethane block paving sealer must not be used on any other form of paver, brick, paving slab, natural stone or block pavers finished with a top course of natural aggregate. The urethane brick paving sealer is very hard wearing and resistant to staining from oil spillages.

** DO NOT TO BE USE ON CLAY PAVERS

• Urethane sealer should be applied when the block paving and jointing sand is clean and dry
• Apply only if no rain forecast for at least 8 hours.
• Air temperatures should be above 8 degrees centigrade and lower than 25 degrees.
• Make sure no efflorescence (surface salts) are present
• Ensure no jointing sand is visible on the surface or too high in joints of the blocks to avoid sealing it in.
• For edges and borders use a paint brush or small roller.
• Apply to main areas by roller or squeegee at ratios of 2sq metres per litre on the 1st coat and 3.5 sq metres per litre on 2nd coat
• Apply second coat no later than 4 hours after 1st coat
• Do not drive on for 24 hours and do not walk on for at least 3 hours after second coat
• Wear a protective mask, goggles and gloves all all times

If you need further technical or application information please call Smartseal on (01) 649 9053

QUICK AND RELIABLE DELIVERY THROUGHOUT IRELAND

We offer a delivery service across Ireland for all of our products. 

We provide a comprehensive guarantee of quality and ensuring a reliable nationwide delivery service to all our customers is very important. It does not matter if you live in Dublin, Cork, Sligo or Limerick, our service is as consistent and reliable as can be. This is a testament to the many satisfied customers that have commented on our delivery service over the years. 

We can deliver to another address if you are not going to be in to receive the products. If you notify us with clear delivery instructions, we can also leave with a neighbour or somewhere at your property without a signature.

It is also our aim to monitor our stock levels closely to ensure we can always fulfill demand and make sure products are sent out as soon as possible.

Please read the section relating to deliveries under our Terms and Conditions.